A great shoe polishing technique will not just make your shoes look great, it will also extend their life. Determining how to polish your own shoes will provide you with a great sense of comfort and save you a lot of money over the years. Shoe-polishing is very simple to do, once you have the proper materials and a little patience.

Clean the shoes-

Before you start polishing, it is essential that you first clean your shoes to dismiss any built-up dirt, salt or dust. Otherwise, the dirt could get trapped beneath the polish or mark the surface of the shoes. Brush the shoe quickly with your horsehair brush to remove any debris.

# Alternatively, use a watered cloth to wipe all around the surface of the shoe. Simply leave the shoes to dry thoroughly before moving on to the next step.

# At this point, you may also need to remove the laces from your shoes. This will give you smoother access to the tongue of the shoe and will override any polish from getting on the laces.

 

Allow the polish to dry also add additional layers if needed-

Once you have applied a shine to the first shoe, set it aside on the newspaper and start working on the second shoe. Each shoe will need about 15 to 20 minutes of drying time.

# If you feel like your shoes need another layer of polish, apply this second layer using the equivalent technique as above.

# Remember to practice the minimum amount of polish needed to cover the shoe. It is sufficient to build-up multiple light layers than use a single thick layer.

 

Apply the polish applying small circular motions-

Set the old t-shirt or polishing brush into your preferred polish and work it into the surface of the shoe, utilizing small circular motions. Apply a medium pressure and make sure to coat the surface steadily, paying special attention to the toe also heel which gets the most wear.

# The simplest way to use an old t-shirt is to wrap the element tightly around your index and middle fingers and use them to operate the polish into the shoes.

# Apply a toothbrush or q-tip to work the polish into the hard-to-reach places, such as the edge of the upper or the cracks in the tongue.

# You may also require to apply polish to the sole of each shoe, in the space within the toe and heel which doesn’t touch the ground.

 

Brush off the excess polish-

Once any extra layers of polish have dried, grab your horsehair brush also remove the excess polish utilizing short, quick strokes. Don’t be afraid to place some elbow grease into it — the heat generated from the strong brushstrokes improves the polish to immerse into the leather.

# Most of the acts involved in these strokes should arrive from your wrist. Keep the rest of your arm stationary while your wrist quickly flicks the brush back and forth.

# Make assured to even brush the surface of both shoes. When you are done, the shoes should have a smooth finish with a slight shine. If excellent shiny shoes are not your thing, you can stop here.